Product description
Size: 10mm x 27m
Perfect for making flat lightweight items magnetic. Magnet requires direct and full contact with steel for maximum hold, therefore it is best to make sure that magnet is flat. Magnet & adhesive work best when applied at above 60 degrees Fahrenheit or 15.56 degree Celsius. For best results:
1)Allow magnet to reach room temperature then cut magnet with heavy duty scissors or hobby knife.
2)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. Do not roll magnet strip in opposite direction to remove curl.
3)Clean applicable surface for adhesive with isopropyl alcohol and allow to dry.
4)Peel back liner from the adhesive and place item on adhesive.
5)Apply adhesive to surface with firm pressure 6)Allow adhesive to cure for a minimum of 24 hours or 72 hours to reach maximum bond with surface.
- Measurement: roll
- Sample Type:
- Weight (KG):
- Shipment Location:
Write Your Own Review